Furnace Repair in Pleasant Grove, UT
- Trained Technicians
- Financing Available
- 900+ 5 Star Reviews
Same Day Furnace Repair in Pleasant Grove, UT
Winter settles in hard once snow reaches the Timpanogos foothills, and a furnace that won’t fire is more than an inconvenience. Utah Heating and Cooling provides heating repair throughout Pleasant Grove for furnaces that blow cold air, shut off early, make strange noises, or refuse to start at all.
Our licensed, bonded, and insured technicians repair every major brand, including Carrier, Trane, Lennox, Goodman, Rheem, and American Standard. We find the real cause, hand you a written quote before any work begins, and fix about 95% of calls on the first visit, because our trucks carry the ignitors, flame sensors, capacitors, and controls that fail most often.
Financing with 0% APR is available for qualified customers, and we work alongside your home warranty partners to keep the claim moving. If your furnace is worn out, we’ll tell you so and explain a full furnace upgrade as an option, with no pressure.
Furnace Repair Service Today!
Signs Your Furnace Needs Attention
A struggling furnace usually shows symptoms before it fails completely. Here’s what to watch for.
The Air From the Vents Feels Cool
If the blower runs but the air is lukewarm, the burners may not be lighting, or a dirty flame sensor could be shutting them off seconds after ignition. A tripped limit or pressure switch can cause the same result.
The Furnace Turns On and Off Constantly
Short cycling is often caused by overheating from a clogged filter, a blocked vent, or problems with the thermostat wiring. It wears out parts quickly and drives up your gas bill.
New Sounds at Startup
Booming or banging can point to delayed ignition, squealing often means a blower motor issue, and a constant hum can be an inducer motor on its way out. Any new noise is worth a call.
A Yellow Flame or a Lingering Smell
Burners should burn mostly blue. A yellow, lazy flame signals incomplete combustion and needs prompt attention. A light dust smell at the start of the season is normal, but one that doesn’t fade isn’t.
Furnace Repairs We Handle Every Winter
These are the problems our technicians fix most often in Pleasant Grove homes, and many of them are caught early with annual heating tune-ups.
Ignitor and Flame Sensor
A cracked hot surface ignitor or a coated flame sensor leaves you with a furnace that clicks, tries to light, and gives up. These are some of the most common and most affordable heating repairs we make.
Snow-Blocked Vent Pipes
High-efficiency furnaces vent through PVC pipes on the side of the house. When heavy snow buries those pipes or the condensate line freezes, a safety switch shuts the furnace down. We clear the blockage and adjust the setup so it doesn’t keep happening.
Blower Motor Trouble
If the furnace heats but very little air reaches the rooms, the blower motor, capacitor, or bearings may be failing. It’s a common complaint in two-story homes, where upstairs bedrooms lose heat first.
Inducer Motor and Pressure Switch Faults
The inducer clears exhaust gases before ignition, and the pressure switch confirms it did its job. When either part fails, the furnace locks itself out for safety. We test both and replace only what’s actually bad.
Heat Exchanger Safety Checks
A cracked heat exchanger can let combustion gases into your home’s air, so we treat any suspected crack seriously. We show you photos of what we find and always welcome a second opinion before you decide anything.
Also Includes Complimentary Second Opinions!
"*" indicates required fields
Why Pleasant Grove Homeowners Choose Us for Furnace Repair
Expert technicians, honest pricing, and a real commitment to getting your heat back on fast when Pleasant Grove winters hit hardest.
We Work With Home Warranties
Flexible Financing
Trained Technicians
900+ 5 Star Reviews
See What Our Happy Customers Are Saying
Discover why homeowners and businesses trust us as their go-to choice for reliable, high-quality HVAC services in Salt Lake City backed by exceptional service.
Have Furnace Questions? We’ve Got Answers!
A cold house raises a lot of questions. These are the ones we answer most often.
How Much Does Furnace Repair Cost in Pleasant Grove, UT?
Most of our furnace repairs fall between about $150 and $700. Smaller fixes like a flame sensor or ignitor sit at the low end, while blower motors and control boards cost more. You’ll always get a written quote before work starts.
Why Is My Furnace Running but Not Heating?
A dirty flame sensor, a failed ignitor, or a clogged filter causing the furnace to overheat are the usual suspects. Check the filter and thermostat setting first, then call us if the air is still cold.
Why Does My Furnace Keep Shutting Off?
Frequent shutdowns usually come from overheating, a dirty flame sensor, or a blocked vent pipe tripping a safety switch. After a snowstorm, check outside to make sure snow isn’t covering the PVC pipes.
What Should I Do if I Smell Gas?
Leave the house immediately, don’t touch light switches or anything that could spark, and call your gas utility or 911 from outside. Once it’s declared safe, we’ll inspect the furnace and gas connections before it’s used again.
Is It Worth Repairing an Old Furnace?
If the furnace is under 12 to 15 years old and the problem is a single part, repair usually makes sense. Older systems with repeated breakdowns or safety issues are better candidates for replacement.
Do You Offer Warranties on Furnace Repairs?
Yes. We provide a 1-year labor warranty and a 10-year parts warranty on qualifying repairs, and 0% APR financing is available for qualified customers.
Our Services
Related Furnace Services in Pleasant Grove, UT
We provide full service furnace repair, maintenance, and installation, as well heat pump and ductless systems services.